Manual Pc Adjustment - Panasonic PLC-XU75A Owner's Manual

Computer Input

Manual PC Adjustment

Some computers employ special signal formats which may not be tuned by Multi-scan system
of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to
match those signal formats. The projector has 5 independent memory areas to memorize those
parameters manually adjusted. It allows you to recall the setting for a specific computer.
1
Press the MENU button to display the On-Screen
Menu. Press the Point
red framed pointer to the PC Adjust Menu icon.
2
Press the Point
framed pointer to the item that you want to adjust
and then press the SELECT button to display
the adjustment dialog box. Press the Point
buttons to adjust the value.
Fine sync
Eliminate flicker from the image displayed. Press the
Point buttons to adjust the value. (From 0 to 31.)
7 8
Total dots
Adjust the number of total dots in one horizontal
period. Press the Point
to match your PC image.
Horizontal
Press the Point
7 8
picture position.
Vertical
Press the Point
7 8
picture position.
Current mode
Press the SELECT button to show H-sync freq. and
V-sync freq. of the connected computer.
Clamp
Adjust clamp level. When the image has dark bars, try
this adjustment.
28
28
buttons to move the
7 8
buttons to move the red
ed
buttons to adjust number
7 8
buttons to adjust the horizontal
buttons to adjust the vertical
PC Adjust Menu
Move the red framed
pointer to an item and press
the SELECT button.
7 8
Selected Mode
Press the SELECT
button at this item to
adjust other items.
Press the SELECT button at
the Current mode item to
show the information of the
connected computer.
PC Adjust Menu icon
Status (Stored/Free)
of the selected Mode.
Press the Point
7 8
buttons to adjust the
value.