Panasonic PLC-XU75A Owner's Manual page 50

Setting
To Enter the PIN code
Select a number by pressing the Point
And then press the Point
and move the pointer. The number changes to "✳".
If you fixed an incorrect number, move the pointer
to the number you want to correct by pressing the
Point button, and then select the correct number
7
by pressing the Point
Repeat this step to complete entering a four-digit
number.
After entering the four-digit number, move the
pointer to "Set" by pressing the Point
Press the SELECT button so that you can change
the following PIN code lock settings.
If you entered an incorrect PIN code, "PIN code" and
the number (✳✳✳✳) turns red. Enter a correct PIN
code all over again.
To Change the PIN code lock setting
Select Off, On1, or On2 with the Point
and then move the red framed pointer to "Quit" with
the Point button. Press the SELECT button to
d
close the dialog box.
To Change the PIN code
The PIN code can be changed to your desired four-
digit number.
Select "PIN code change" with the Point
and press the SELECT button to display the New
PIN code input dialog box.
Select a number by pressing the Point
And then press the Point
and move the pointer. Repeat it to complete
entering a four-digit number. After entering the four-
digit number, move the pointer to "Set" by pressing
the Point button. Then press the SELECT button.
8
CAUTION:
WHEN YOU HAVE CHANGED THE PIN CODE,
WRITE DOWN THE NEW PIN CODE IN COLUMN
OF THE PIN CODE NO. MEMO ON PAGE 66, AND
KEEP IT SECURELY. IF YOU FORGET YOUR PIN
CODE, THE PROJECTOR CAN NO LONGER BE
STARTED.
50
ed
button to fix the number
8
buttons.
ed
8
7 8
d
ed
button to fix the number
8
Enter a PIN code
buttons.
button.
buttons
Move the pointer to "Set" by pressing
the Point
the SELECT button.
Change the PIN code lock setting
button,
buttons.
Change the PIN code
The input numbers change
to "✳" for security.
button. And then press
8
Select a desired setting with
the Point 7 8 buttons.
Select PIN code change and
press the SELECT button.
The New PIN code input
dialog box appears.
The input numbers are being
displayed for confirmation.