Figure - Grizzly CYCLONE G0637 Owner's Manual

12.
Figures 18 & 20

Figure 20.

13.
14.
15.
Figure 21.
Figure 21
Note: Orient the two assemblies so that the
large, round intake port of the intake barrel
is NOT directly underneath the rectangular
outlet port of the blower housing. The outlet
port will connect to the canister filters and will
not allow room for attachment of the intake
ducting to the intake port.
16.
Figure 22
Figure 22.
Tip: When installing the two bolts above the
intake port of the intake barrel, use duct tape
on the bottom of your wrench. This will hold
the bolts in the wrench while inserting them in
place (see Figure 23
Figure 23.