Correcting Phase Polarity - Grizzly CYCLONE G0637 Owner's Manual

Correcting Phase Polarity

NOTICE
If this machine is wired out-of-phase, the
motor and impeller will spin in the wrong
direction. The efficiency of the dust col-
lector will be greatly reduced and will not
provide the rated CFM. You must make
sure the motor is spinning in the correct
direction before placing the machine into
full operation. Perform Step 10 of the test
run on Page 32 to make sure the machine
is correctly wired.
To correct phase polarity:
1.
2.
Figure 5.
Figure 5
3.
4. Step 10 Page 32