Snom 760 User Manual page 90

Hide thumbs Also See for 760:
Table of Contents

Advertisement

Contacts
Contact List, where the Presence State of selected users can be seen (online, busy,
offline)
Directory
Internal phone directory
DND
Turning "Do not disturb" function (DND) on an off. When mapped to a function key
with an LED, the LED will light up when DND is turned on.
Favorites
Favorites list
Forward all
All incoming calls will be forwarded to another extension or an external phone
number. After turning call forwarding on with this key, the display will prompt you to
enter - or confirm/change a previously entered - forwarding number.
Help
FW versions lower than 8: Phone's IP address, MAC address, and firmware version.
FW 8 and higher: Phone's IP address and the URI to snom Wiki. IP address, MAC
address, and firmware version can be found in Settings > 6 Information >
2 System Information.
Hold
Placing the active call on hold
LDAP Directory
Allows the user to look up a remote directory while dialing. Once set, this pressed
key will open up the Direcory Search window. If LDAP is setup, corresponding
matching entries as returned by the sever will be shown. If LDAP is not used and and
presence_lookup_number setting is turned on, the contact matches will be shown.
The default edit mode is alphanumeric in this state.
Logoff Identities
Caution: This option will delete all account settings!!
Usage: Mainly useful for call centers with frequently changing users.
Menu
Calling up the settings menu of the phone
Missed Calls
Missed call history list
Monitor Calls
When the phone has been programmed to monitor extensions and do/allow call
(not available on
pickup, a key can be mapped to show the list of monitored extensions and do call
snom 300)
pickup from the monitor.
FW v8.7.2 and higher: The list will show only active extensions (i.e., busy or ringing).
When there is no activity on any monitored extensions, the list is empty.
Mute
Mutes/unmutes the microphone (handset, speakerphone, headset) during active call
Next Outgoing ID Selecting the next identity as the outgoing identity
Presence State
Providing access to a list where the Presence state of each registered SIP Identity
can be defined (online, offline, busy, invisible).
Prev. Outgoing ID Selecting the previous identity as the outgoing identity
Reboot
Rebooting the phone
Record
The phone does not record the voice streams at all; they must be recorded on the
PBX or other external device. Pressed during a call, the key informs the PBX to
start and stop the recording of the audio stream on the PBX. While the call is being
recorded, the recording symbol
in red
LED, the LED will be lit throughout the recording. Please be advised that you must
respect the legal restrictions of your country for recording calls with or without the
participants' knowledge and permission.
Redial
Dialed call history list (last call at the top)
Appendix 5 - Programmable Functions
, in the status line, depending on the phone type; if the function key has an
will either blink on the display or be displayed,
90

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

D765

Table of Contents