Initializing And Registering The Phone; Prerequisites; Initialization - Snom 720 User Manual

snom 720 User Manual
text field of "Audio parameters". Click on the question mark
parameters.
If you are using a different headset, whatever the firmware version, enter the
parameters of the headset manually on the phone's web interface at > Advanced
> Audio > text field of "Audio parameters". Click on the question mark
out which parameters you need to use for your respective headset.
I
nitializing and registering the phone

Prerequisites

To be able to use VoIP, you or your company must have:
• A broadband internet connection.
• Access to the internet via a router. This could be a separate device available in various versions
from many different manufacturers or in the form of a router on a server or a PC.
• Account information provided by your network administrator or a VoiP account with a VoIP service
provider who supports the VoIP SIP standard. The phone supports up to 12 VoIP accounts with
one or more VoIP providers.
You will need the registration information received from your Internet service provider or your network
administrator. Required and optional data differ from provider to provider. They normally include:
• Account (usually the phone number). On snom phones, an account is called an "identity".
• Registrar
• Password
User name, authentication name, outbound proxy may also be required. These are settings that can
only be configured on the web interface of the phone after it has been successfully registered. If
your provider or your network provides a mailbox account, that setting is also configured on the web
interface. For more information, see "Identities/accounts" on page 64.

Initialization

snom phones are plug-and-play. Once the phone is connected to your network, it will begin to initialize.
note: Normally the initialization is completely automatic, using DHCP. If the phone
cannot discover a DHCP server in the subnet, you will be asked: Are you using DHCP?
If your network does not support DHCP, press
gateway, and DNS server manually. Ask your Internet service provider or your network
administrator for them.
Watch the display and, when asked to, make selections with
1. You will be prompted in English to select a language. Use
applicable, and press
2. Next, you will be prompted in the language of your choice to select a time zone. This affects the
to save the language preceded by .
16
?
and enter the IP address, netmask, IP
and save with
to select another language, if
Setting up the Phone
to look up the
?
to find
.