Appendix 2 - Status Messages - Snom 720 User Manual

S
tatus messages
Whenever there is a current message concerning the status of the phone, the function key
available. Press the function key (or
screen. Additionally, some status messages will also be displayed in the status bar; if there is more than
one current message, the one with the highest priority will be shown. The messages in descending order
of priority:
status message
SW 1
Reboot required 1
SIP disabled 1,²
Error 1
Low memory 1
Remote directory is too big 1
Not Registered: <account> 1,²
Waiting for <name/number> to be
available ²
<account> is now available ²
Forward when Busy: <name/number>
Forward after Timeout: <name/number>
Forward all: <name/number> ²
Contacting NTP server
NTP server unreachable 1
HTTP Password not set 1
Admin Password not set 1
Keyboard locked ²
DND active ²
You have messages
You have new messages
Old messages
Missed: <number>
Info
1 The function key
² The message cannot be deleted from the "Status Info" screen

Appendix 2 - Status messages

> 6 Information > 1 Status Info) to open the "Status info"
Definition
A firmware update is available
Reboot required, for example to have settings changes
take effect
The phone cannot make calls due to license problems
An error occurred
Disk space full
The remote directory is too big to be imported
The specified identity/account is not registered
Waiting for call completion to busy or currently unavailable
number
The dialed number is not busy anymore or is now available
Call forwarding is on. When your phone is busy, incoming
calls will be forwarded to the phone number indicated
Call forwarding is on. When an incoming call is not picked
up within the set number of seconds, the call will be
forwarded to the phone number indicated
Forwarding of all incoming calls is on. All incoming calls
will be forwarded to the phone number indicated.
Network Time Protocol (NTP) is a protocol for
synchronizing clocks over data network. If the connection
is interrupted, the phone will not be able to display the
correct time.
No HTTP password has been set
No Admin password has been set
Only numbers designated as emergency numbers can be
dialled
Do not Disturb mode is activated
There are spoken messages on the mailbox
New (messages on the mailbox)
Old (messages on the mailbox)
The number of calls you missed since the last time you
checked the list of missed calls or turned off the missed
call indication
will be blinking
81
will be