COMPRO IP60 User Manual page 54

However, should the scanning returned zero cameras found then we can start
the following troubleshooting procedure.
Hardware wiring check
a. Please check that the camera had been connected to either the wired or
wireless network and had been powered on for 1 minute. You can check
the status of the IP camera by checking the front blue LED.
Steady (Blue)
Successful
connection to the
network
b. Please check that your computer has a successful connection to the
network.
Computer has connection
c. If you are using the wireless network, please ensure that:
1. The IP camera is connected to the correct wireless access point.
2. You've correctly set the encryption type and key for the connection,
where applicable.
3. If your network does not have a router then the default IP address for
Blinking (Red)
The camera is unable
to connect to the
network
Computer has no connection
54
IP60 IP Camera User's Manual
Off
The unit is either not
working or the LED had
been turned off.