The Internet Setting - COMPRO IP60 User Manual

The Internet Setting

The IP camera connection could follow the method below:
1. If user's PC is support Universal Plug and Play (UPnP™) service and
network setting is in DHCP, the Compro IP60 will auto detected and add it
into the My Network place.
(If user could see the Compro IP60 already, please switch to next page)
Note: If user wants to install the UPnP™ service, please execute the
"Add/Remove" program in "Control Panel". After the dialog opened,
please select "Add/Remove Windows Components" and select the
"Networking Services" selection. User will see the "Detail" button, please
press it and try to find the "UPnP" selection. Please select it and add it into
user's operation system.
2. If user uses the router, user should easy to see the IP address had been
assigned for the Compro IP60 in the router's administration pages. If user
gets any problem, please refer the router's documentation.
3. If user uses DHCP to connect to internet, then user needs to apply for a
DDNS (Dynamic DNS), user could apply to a new hostname from Compro's
free iDDNS service or refer to the DynDNS or no-ip website and apply for a
new one. After user gets the DDNS, please enter the IP address to login the
IP Camera. After login the IP Camera, please go for Setup  Network 
DDNS and enter the entire DDNS column.
47
IP60 IP Camera User's Manual