COMPRO IP60 User Manual page 41

Recording Setup
In addition to the capability of storing event snapshots to local SD Card slot
(card not included), this camera also supports storage of video clips (audio
may be included if enabled) to either the local or the remote storage device. To
access this feature, in [Setup], click on [Recording Setup] located on the left
menu. In order to properly access the recording function, the users must
consider:
1. Destination: One of the following storage media may be selected.
microSD/SDHC
NAS (Samba-based)
NFS (Network File
Server)
2. microSD/SDHC Setup:
SD Card Status
SD Card Capacity
Format
Enable Recording
during network failure
3. NAS Setup:
Domain Name / IP Address Network address of Samba-based NAS
Directory
User Name / Password
Check NAS Status
4. NFS Setup:
IP Address
Directory
5. File Management: Once the selected storage is full, the oldest file will
automatically be overridden.
6. Recording Setup: Click on [Next] to setup recording methods:
Event-based or Scheduled.
Event-based Recording: Records when motion, audio and I/O are
triggered (multiple choices). Recording length: 60~3,600 sec, default 60
Local Remote
V
V
V
Status verification
Show available and total space in the card
Show available and total space in the card
Click to allow forced recording to SD card
during network failure
(Network Attached Storage)
Storage path
User authentication data set for NAS
Status verification
Network address of NFS (Network File Server)
Storage path
41
IP60 IP Camera User's Manual