COMPRO IP60 User Manual page 39

UPnP:
Click here to enable/disable the UPnP settings of IP camera in your
local network. Also, you can change the device name by yourself. If you want
to use the IGD (Internet Gateway Device) protocol on your IP camera, please
click and enable it.
RTP:
If you want to setup the broadcast of video with RTP (Real-time Transport
Protocol), you can setup the port range, video/audio address and port number
in here.
Event Setup
When event happened, like motion detection or I/O triggers by detection, the
snapshot will instantly send to your mail, ftp, image or ComproView notify
server to warning you about what's happened.
In order to properly setup the event function, the users must:
1. First setup the event server based on the need, E-mail, FTP, Image or
ComproView Notification.
2. Once the even server are setup, the user can now go to the trigger setup
to setup the type of events, motion, schedule and the associated even
actions.
3. In the motion detection page, the users can setup the region and the
sensitivity of the detection.
4. If the users want to use the I/O input, please connect the I/O devices
before event setup.
Event Server Setup:
in E-mail, FTP, Image or ComproView Notify server. Please click and select
the way of event server you need and input related server information.
Email server:
platforms such as Hotmail (Windows Live) and Google Mail (Gmail) is also
included. To use this function, in [Event Server Setup] > [Email Event Server
Setup], enter their SMTP address and SSL port respectively.
As of August 2010, SMTP and SSL settings for Hotmail and Gmail are as
follows:
SMTP
Hotmail smtp.live.com
Google Mail smtp.gmail.com 465
Here provides the 4 different event server configurations
Support of standard SMTP on SSL-protected webmail
SSL
587
39
IP60 IP Camera User's Manual