Software Installation - COMPRO IP60 User Manual

Software Installation

Before Compro software installation, user has to make sure the IP Camera is
beside you. The wizard of ComproView Installer on the installation CD will help
you to step-by-step install IP camera hardware and software on your system.
1. Insert
the
installation CD to CD-ROM drive,
the installer will automatic start for
installation,
display language at first.
2. Please click "IP Camera Setup"
and select IP60 to install your IP
camera. Also, you can select other
icons to
documents, browse CD contents,
or exit.
3. Step1: Connect your camera as
the picture shown, or you can click
to watch the tutorial video. After
connect all the network and power
cables, please click "Next".
If you already connect your IP
camera cables, you can skip this
step and click "Next" to continue.
Compro software
please select
open the related
the
16
IP60 IP Camera User's Manual