COMPRO IP60 User Manual page 24

LED Light of IP60 Camera
When you connect the power of IP60 camera, the camera will start booting
procedure. The LED light will be lighting as the following procedure:
There are blue and red LEDs inside the camera.
1. Once the IP camera connect with power for about 25 seconds, both the
blue and red LED light will turn on, (Looks like purple).
2. After about 35 seconds, the red LED will turn off.
3. Trying to connect: Both blue & red LED flashing in 0.5 second interval.
4. Connection established: Blue LED constantly on (Red LED off)
5. Connection failed: Flashing red LED. (Blue LED off)
LED Status:
Steady(Blue)
Successful
connection to the
network
Blinking(Red)
The camera is
unable to connect
to the network
Blue: The network connection
well
24
IP60 IP Camera User's Manual
Off
The unit is either
not working or the
LED had been
turned off.