COMPRO IP60 User Manual page 37

Network Settings
Here you can check your network settings
and do the detail settings.
Ethernet:
Setup the IP address of IP camera from DHCP mode
(recommended) or input the static IP address. And also input the username
and password of the PPPoE network.
Wireless:
If you have installed the Compro wireless adaptor in your IP
camera, you can setup the wireless in this page. Please click the "Use
Wireless First" to enable the wireless reception in the future. And then setup
the IP address and the access point details. After the settings, please click
"Save" to take it effect.
Network Diagnostic:
network settings and it will show the information if any error. If there is any
error display, please refer to the FAQ section for more information.
Detail setting list
Here you can run the diagnostic tool for your current
37
IP60 IP Camera User's Manual
Current network
settings overview