Static Color; Auto Programs; Edit Customs; Master/Slave - Chauvet COLORado 1 IP User Manual

Operation

Static Color

Auto Programs

Edit Customs

Master/Slave

-10-
The Static Color mode allows for permanent RGBW color mixing without a DMX controller.
1. Go to the STAT main level.
2. Select the desired color (R., G., B., or W.).
3. Select the desired color value (000~255).
4. Repeat for the other colors.
5. Select ST.
6. Select the desired frequency (00~20).
Auto programs allow for dynamic RGBW color mixing without a DMX controller.
1. Go to AUTO.
2. Select the desired auto (AT.01~10) or custom program (PR.01~10).
You cannot edit any of the auto programs (AT.01~10). However, you can edit the
custom programs (PR.01~10). See Edit Customs below for details.
This setting allows the programming of up to 30 scenes for each of the 10 customizable
programs, including colors and effects.
1. Go to the EdIT main level.
2. Select the desired auto program (PR.01~10).
3. Select the desired scene (SC.01~30).
4. Select the desired color or effect (R., G., B., W., Sb., T., or F.).
5. Select the color or effect value (000~255 for colors and timers, or 00~20 for strobe).
6. Repeat for the other colors or effects.
7. Return to the scene level (SC. or step "3").
8. Repeat the settings of colors and effects for the other scenes.
The Master/Slave mode allows a group of COLORado™ 1 IPs (the slave products) to
simultaneously duplicate the output of another COLORado™ 1 IP (the master product)
without a DMX controller.
1. Set each of the slave products:
a. Go to RUN.
b. Select SLAV.
2. Set the master product:
a. Set the running mode to DMX as explained in
Addressing.
b. Select an auto or custom program as explained in Auto Programs above, or a
static mix of colors.
• The master product is the one that runs a program (whether Auto or Custom) or
Static Color mode.
• Do not connect a DMX controller to the products configured for Master/Slave
operation. The DMX controller may interfere with signals from the master
product.
• The master product should be the first product in the daisy chain.
DMX Control Without ID
COLORado™ 1 IP User Manual Rev. 2