ABLE OF ONTENTS 1. Before You Begin ......................3 What Is Included ......................... 3 Unpacking Instructions ........................ 3 Claims ..............................3 Text Conventions ........................3 Symbols ............................3 Disclaimer ........................... 3 Product at a Glance ........................4 Safety Notes ..........................4 2.
Failure to report damage to the carrier immediately may invalidate your claim. In addition, keep the box and contents for inspection. For other issues, such as missing components or parts, damage not related to shipping, or concealed damage, file a claim with CHAUVET® within 7 days of delivery. Text Convention...
Product at a Use on Dimmer Auto Programs Glance Outdoor Use Auto-ranging Power Supply Sound-Active Replaceable Fuse User-Serviceable Master/Slave Duty Cycle Safety Notes These notes include important information about the mounting, usage, and maintenance of this product;...
2. I NTRODUCTION Overview Power Out Power In Fuse Holder DMX In DMX Out Intensity Adjustment Knob Speed DIP Switches Adjustment Knob Back Panel View Techno Strobe™ 168 User Manual (Rev. 2) Page 5 of 16...
3. S ETUP AC Power The Techno Strobe™ 168 has an auto-ranging power supply and it can work with an input voltage range of 100~240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart.
The power linking diagram shown above corresponds to the North American version of the product ONLY! If using the product in other markets, you must consult with the local CHAUVET® distributor as power linking connectors and requirements may differ in your country or region.
Mounting Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes. Orientation The Techno Strobe™ 168 may be mounted in any position; however, make sure adequate ventilation is provided around the product. Rigging • Before deciding on a location, always make sure there is easy access to the product for maintenance and programming.
4. O PERATION Configuration Set the product in DMX mode to control with a DMX controller. Connect the product to a suitable power outlet. (DMX) Connect a DMX cable from the DMX output of the DMX controller to the DMX input socket on the product.
DIP Switch You can use the table below to set your fixture’s DIP switches. Imagine that you want to find the DIP switch settings for DMX address 328: Reference Find 328 among the addresses from the table and point at it with your finger. Guide Move your finger to the left and you will find the settings for DIP switches [1]~[5].
DMX Channel Modes, Assignments, and Values 2-Channel Channel Function Value Percent/Setting 000 005 No function 006 240 Strobe speed, slow to fast Control Functions 241 250 Full On (all LEDs on) 251 255 Sound-Active mode Dimmer 000 ...
Master/Slave The Master/Slave mode allows a single Techno Strobe™ 168 unit (the “master”) to control the actions of one or more Techno Strobe™ 168 units (the “slaves”) without the Mode need of a DMX controller. The master unit will be set to operate in Manual or Sound- Active mode, while the slave units will be set to the same DMX starting address.
5. T ECHNICAL NFORMATION Product Dust build-up reduces light output performance and can cause overheating. This can lead to reduction of the light source’s life. To maintain optimum performance and Maintenance minimize wear, clean the product at least twice a month. However, usage and environmental conditions contribute to increased cleaning frequency.
6. T ECHNICAL PECIFICATIONS Dimensions and Length Width Height Weight Weight 5.5 in (140 mm) 9.4 in (238 mm) 8.7 in (220 mm) 2.3 lbs (1.0 kg) Note: Dimensions in inches rounded to the nearest decimal digit. Power Power Supply Type Range Voltage Selection Switching (internal)
You must send the merchandise prepaid, in its original box, and with its original packing and accessories. CHAUVET® will not issue call tags. Clearly label the package with the RMA number. CHAUVET® will refuse any product returned without an RMA number.
Need help?
Do you have a question about the Techno Strobe 168 and is the answer not in the manual?
Questions and answers