Introduction - Eaton 9130 UPS User Manual

Chapter 1
Eaton ® 9130 UPS (700–3000 VA) User's Guide

Introduction

The Eaton 9130 uninterruptible power system (UPS), protects your
®
sensitive electronic equipment from the most common power problems,
including power failures, power sags, power surges, brownouts, line
noise, high voltage spikes, frequency variations, switching transients,
and harmonic distortion.
Power outages can occur when you least expect it and power
quality can be erratic. These power problems have the potential to
corrupt critical data, destroy unsaved work sessions, and damage
hardware — causing hours of lost productivity and expensive repairs.
With the Eaton 9130, you can safely eliminate the effects of power
disturbances and guard the integrity of your equipment. Providing
outstanding performance and reliability, the Eaton 9130's unique
benefits include:
S
True online double-conversion technology with high power density,
utility frequency independence, and generator compatibility.
S
ABM technology that uses advanced battery management to increase
battery service life, optimize recharge time, and provide a warning
before the end of useful battery life.
S
Selectable High Efficiency mode of operation.
S
Rackmount models in a space-optimizing 2U size that fits any
standard 48 cm (19") rack.
S
Standard communication options: one RS-232 communication port,
one USB communication port, and relay output contacts.
S
Optional connectivity cards with enhanced communication
capabilities.
S
Optional modem capability for remote monitoring and service.
S
Extended runtime with up to four Extended Battery Modules (EBMs)
per UPS.
S
Firmware that is easily upgradable without a service call.
S
Emergency shutdown control through the Remote Emergency
Power-off (REPO) port.
S
Backed by worldwide agency approvals.
S 164201718 Rev 3 www.eaton.com/powerquality 1