Replacing Rackmount Ebms - Eaton 9130 UPS User Manual

Replacing Rackmount EBMs

The EBM is heavy (see page 78). Lifting the cabinet into the rack requires a minimum of two
people.
To replace the EBMs:
1. Remove the front cover of each EBM. See Figure 27.
To remove the cover, remove and retain the two screws on the
right side of the cover. Grasp the sides of the cover and slide the
cover to the left and then away from the cabinet.
EBM Cover Hook
Eaton ® 9130 UPS (700–3000 VA) User's Guide
C A U T I O N
Bottom EBM Cable Knockout
(underneath cover)
Figure 27. Removing the EBM Front Cover
S 164201718 Rev 3 www.eaton.com/powerquality
UPS MAINTENANCE
Top EBM Cable Knockout
69