Configuring Lan Settings - EnGenius X-TRA RANGE ENS200 User Manual

B N S
ASIC ETWORK ETTINGS

4.3.2 Configuring LAN Settings

IP Address Enter the LAN port IP address.
IP Subnet Mask Enter the LAN IP subnet mask.
WINS Server IP Enter the WINS Server IP.
Use Router As DHCP Server
enable the ENS200 internal DHCP server.
Starting IP Address Specify the starting IP
address range for the pool of allocated for private IP
addresses. The starting IP address must be on the
same subnet as the ending IP address; that is the
first three octets specified here must be the same as
the first three octets in End IP Address.
Ending IP Address Specify the ending IP address
range for the pool of allocated for private IP
addresses. The ending IP address must be on the
same subnet as the starting IP address; that is the
first three octets specified here must be the same as
the first three octets in Start IP Address.
WINS Server IP Enter the IP address of the WINS
server.
Click Accept to confirm the changes or Cancel to cancel and return previous settings.
Check this option to
4-18
C LAN S
ONFIGURING ETTINGS