Touchscreen Display; Applying The Protective Film To The Display; Figure 23 Touchscreen Display - LXE MX7 User Manual

Microsoft windows ce 5.0 equipped

Hide thumbs Also See for MX7:

Table of Contents

Touchscreen Display

The touchscreen display is an active color LCD unit capable of supporting VGA graphics modes.

Display size is 240 x 320 pixels or ¼ VGA in portrait orientation. The touchscreen allows

signature capture and touch input. A pen stylus is included. The touchscreen responds to an

actuation force (touch) of 4 oz. of pressure (or greater).

The color display is optimized for indoor lighting. The display is off when the mobile device is in

Suspend mode and when the device is being powered by the backup battery only.

First, clean the display of fingerprints, lint particles, dust and smudges.

Remove the protective film from it's container. Remove any protective backing from the film

sheet by lifting the backing from a corner of the film. Discard the backing.

Apply the film to the screen starting at one side and smoothing it across the display. If air bubbles

appear, raise the film slightly and continue smoothing the film across the display until it covers the

glass surface of the display.

If dust, lint or smudges are trapped between the protective film and the glass display, remove the

protective film, clean the display and apply the protective film again.

MX7 User's Guide

Touchscreen Display

E-EQ-MX7OGWW-C

Table of Contents