Adjust Microphone And Secure The Cable; Entering Data - LXE MX7 User Manual

22

Adjust Microphone and Secure the Cable

Do not twist the microphone boom when adjusting the microphone.
The microphone should be adjusted to be about two finger widths from your mouth.
Make sure the microphone is pointed at your mouth. Note the small "Talk" label near the
mouthpiece. Make sure the Talk label is in front of your mouth.
The microphone cable can be routed over or under clothing.
Under Clothing
•
Leave the cable exposed only at the top of the collar.
•
Be sure to leave a small loop of cable to allow movement of your head.
Over Clothing
•
Use clothing clips to hold the cable close to your body.
•
Tuck the cable under the belt, but leave a small loop where it goes under the belt.
•
Do not wear the cable on the front of your body. It may get in your way or get caught on
protruding objects.

Entering Data

Data is entered into the MX7 by speaking into the headset's microphone when prompted.
Please contact your System Administrator if assistance is needed with the voice software installed
on your MX7.
MX7 User's Guide
Optional Accessory Installation
E-EQ-MX7OGWW-C