Table of Contents
Advertisement
Model 2100 6 1/2-Digit Resolution Digital Multimeter User's Manual
Figure 4-38
Restart device to complete update message
NOTE
7.
The 2100 (USBTMC) Update Version window will reappear when the installation is
complete. Click Exit to exit the firmware update installation (see
To confirm the update has been properly completed, check the firmware revision number (see
check the firmware
2100-900-01 Rev. B / July 2007
An error message may appear on the front-panel display when you restart your Model
2100. If it does, you will need to click Continue and install the front-end firmware revision
update file (1232_xxx.bin) following the procedures listed above.
If you do not receive an error message, you do not need to install the 1232_xxx.bin
update file.
revision).
Return to
Section Topics
Section 4: Front Panel Operations
Figure
4-38).
To
4-39
Advertisement
Table of Contents
