Section 4: Front Panel Operations
4.
The Open dialog box will appear. The files for the front-end firmware and the digital signal
processor (DSP) updates are listed (see
•
1232_xxx.bin
•
5407_xx.xx.bin
NOTE
Figure 4-36
The Open dialog box
5.
Highlight the 5407_xx.xx.bin file and click Open (see
version update. The 2100 (USBTMC) Update Version window will display a "Please wait"
message while the file is executing, as shown in
Figure 4-37
Model 2100 firmware upgrade in progress
6.
Once installation of the DSP firmware update file is complete, you will be prompted to
restart your Model 2100 to continue the update (see
off, and then power it on again.
4-38
Updates the front-end firmware version
Updates the DSP firmware version
Filenames may vary, depending upon which version of firmware you are installing. The
"xx.xx" and "xxx" in the filenames in this example represent alpha-numeric values that
denote specific firmware revisions.
Return to
Model 2100 6 1/2-Digit Resolution Digital Multimeter User's Manual
Figure
4-36):
Figure
Section Topics
Figure
4-36) to start the DSP firmware
4-37.
Figure
4-38). Power the Model 2100
2100-900-01 Rev. B / July 2007