Keithley 2100 User Manual page 26

Section 2: Getting Started
Figure 2-8
Removing the red voltage selector fuse holder
Step 4: Change the voltage setting
Turn the voltage setting to the correct setting.
NOTE
Table 2-1
Available voltage setting selectors for local line power requirements
2100/120
2100/230-240
2100/220
Step 5: Insert the voltage selector
Insert the voltage setting selector back into the socket and close the cap as shown in
2-6
To accommodate differing local area power requirements, Keithley Instruments has three
available models of voltage setting selectors for the Model 2100 (each with two voltage
settings). The voltage setting selector included with your Model 2100 should have the
appropriate voltage settings for your area's line power requirements. If you do not have
the correct voltage setting selector, please contact your local Keithley Instruments
representative to request the correct model (see
Model number
Return to
Model 2100 6 1/2-Digit Resolution Digital Multimeter User's Manual
Voltage select options
120/240
120/240
120/220
Section Topics
Table 2-1, below).
Voltage set to:
120
240
220
2100-900-01 Rev. B / July 2007
Figure 2-9.