Section 2: Getting Started
for the lower row dot-matrix display. There are additional annunciators above and on the right side
of the display screen that indicate the state or condition of an ongoing measurement. They are
explained individually in the following sections.
Figure 2-31
The display
Annunciators at the top
Figure 2-32
Annunciators at the top
•
RMT (REMOTE): Indicates the remote state (USB Interface)
•
MAN: Indicates the manual range mode is selected
•
TRIG: Shows that single triggering is enabled
•
HOLD: Indicates reading hold function is enabled
•
MEM: Indicates the use of internal reading memory
•
RATIO: Indicates the dcv:dcv ratio operation
•
MATH: Indicates the MATH operation is enabled
•
ERR: Error occurred
•
SHIFT: Indicates the SHIFT button was pressed
•
REAR: The rear panel input terminal is selected for the measurement
•
FILT: The digital filter is enabled
•
4W: Indicates remote sense
•
EXT: Indicates external trigger
2-22
Model 2100 6 1/2-Digit Resolution Digital Multimeter User's Manual
Return to
Section Topics
2100-900-01 Rev. B / July 2007