Table of Contents
Advertisement
Section 4: Front Panel Operations
when the multimeter is turned-off. The reading memory feature can be used for all measurement
functions, math operations, trigger operations, and reading hold.
Using the reading memory
You can store readings and access those readings through either the front panel or a remote
interface.
NOTE
To store readings from the front panel:
NOTE
1.
Press the STORE key. The multimeter will start to store the readings produced until the
specified number of readings is reached. The default number of readings to store is 100.
2.
To change number of readings to store, press the CONFIG and then STORE keys.
3.
Use PREV and NEXT keys to move between the digits and up and down arrow keys to
increase or decrease numbers as desired.
When ready, press ENTER (the default number of readings will be restored when the meter has
been turned off). Refer to
NOTE
Figure 4-28
Storing readings from the front panel
DCI
PREV
DCV
DISPLAY
FILTER
NEXT
EXTRIG
SINGL E
OFF
ON
POWER
TRIGGER
To recall stored readings from the front panel:
1.
Press the RECALL key. The multimeter will display all the stored readings starting from the
first reading.
2.
Use the PREV and NEXT keys or the up and down arrow keys to move from the first
reading to the last reading the meter has stored (refer to
4-32
Readings stored from the Model 2100 to a remote interface will be stored in first-in- first-
out order.
When using the reading memory feature, you first need to select a measurement or math
function, then select the trigger mode.
Figure
The "MEM" annunciator is lit while the multimeter stores readings, and then turned-off
when the specified number of readings is reached.
Procedures: CONFIG + STORE
FUNCTION
ACI
4
PERIOD
2 2
2 2
AC V
AC V
CONT
TEMP
FREQ
dBm
dB
LIMIT S
MX+B
%
DIGITS
RATIO
NULL
MIN/MA X
MATH
HOLD
AUTO
STORE
L OCA L
SHIFT
TRIGGER
RECA L L
MEMORY
Return to
Model 2100 6 1/2-Digit Resolution Digital Multimeter User's Manual
4-28.
<NUMBER>
SENSE
200V
PEA K
SETUP
RANGE
PREV
NEXT
LOCK
F
ESC
ENTER
A UTO
FRONT/REAR
MENU
CONFIG
Section Topics
CAT
1000V
CAT
600V
INPUT
V
4 WIRE
STORE
HI
RATIO
1000V
REF
PEA K
PREV
LO
3A
500V
INPUTS
RMS
PEA K
R
ENTER
3A 250V
AMP S
Figure
4-29).
2100-900-01 Rev. B / July 2007
CONFIG
NEXT
Advertisement
Table of Contents
