Repacking And Transporting Your Machine; Carrying The Machine By The Sides - Canon LASERBASE MF5700 Series User Manual

Repacking and Transporting Your Machine

Be sure to unplug the power cord before transporting the machine. If the machine is likely to be
subjected to vibration (e.g., when transporting over long distances), the following precautions should
be taken. If you do not follow these precautions, the machine may be damaged or the quality of your
printouts may be adversely affected.
1
Unplug the power cord.
2
If the machine is connected to a telephone or your computer, remove the telephone line or printer cable.
3
Open the front cover.
4
Grip the end of the cartridge, and remove it from the machine. In order to avoid direct sunlight, place the
cartridge in the protective bag that the cartridge came in when you purchased it.
5
Close the front cover.
6
Pull out the cassette completely, and remove the extension cover from the machine.
7
Detach the cassette extension from the cassette.
8
Insert the cassette in the machine.
9
Push in the output tray, and close the document feeder tray.

Carrying the Machine by the Sides

Pull out the cassette completely, and remove the extension cover.
Push in the output tray, and close the document feeder tray.
Grip the handles on both sides of the machine and lift it carefully, as shown in the illustration above.
CAUTION
When carrying the machine, be sure to hold it in the designated places as shown in the illustration.
Dropping the machine can cause personal injury.
8
8-9