Print Quality Problems - Canon LASERBASE MF5700 Series User Manual

Print Quality Problems

The print quality is not what you expect; print is not clear, has missing dots or white streaks.
Q
A
Q
A
Q
A
Q
A
Copies are dirty.
9
Q
A
Q
A
Q
A
Q
A
9-14
Are the size, thickness and type of the paper you are using within the specifications of the machine?
Check that the paper you are using is supported by the specifications of the machine. (See "Print
Media Requirements," on p. 2-1.)
Is the cartridge installed correctly?
Make sure the cartridge is installed correctly. (See "Install cartridge," in the Set-Up Sheet.)
Is any toner left in the cartridge?
See "When to Replace the Cartridge," on p. 8-3, and replace the cartridge if necessary. (See
"Replacing the Cartridge," on p. 8-6.)
Is the exposure adjusted correctly?
Adjust the exposure correctly using [Exposure]. (See "Adjusting the Exposure (Density)," on p. 5-3.)
Is the platen glass or the platen glass cover clean?
Clean the platen glass or the platen glass cover. (See "Cleaning the Scanning Area," on p. 8-1.)
Is the cartridge free of damage?
If there is a scratch on the cartridge, replace with a new one. (See "Replacing the Cartridge," on p.
8-6.)
Is the machine adjusted to room temperature? If not, condensation might build up inside the
machine.
Allow at least 2 hours for the machine to adjust to room temperature before attempting to use it.
Is the machine installed in a stable location?
Install the machine in a proper location. (See Chapter 1, "Safety Instructions," in the Quick
Reference Guide.)