Reserve Copy - Canon LASERBASE MF5700 Series User Manual

Reserve Copy

This feature allows you to reserve the next job while the machine is printing out a current job.
NOTE
The machine can store up to 10 copy jobs in memory.
1
Press [Stop/Reset] twice to return to the standby display while the machine is printing out.
NOTE
It is necessary to return to the standby display in order to reserve the next copy job.
2
Place the document you want to reserve on the platen glass or load it in the ADF.
For details on how to place or load documents, see "Setting Up Documents," on p. 3-2.
3
Use the numeric keys to enter the number of copies.
You can set up to 99 copies.
4
Adjust any necessary settings for your document.
5 •
Press [Image Quality] to select the scanning resolution. (See "Adjusting the Image Quality (Resolution)," on p.
5-3.)
•
Press [Exposure] to select the scanning exposure. (See "Adjusting the Exposure (Density)," on p. 5-3.)
•
Press [Enlarge/Reduce] to select the copy ratio. (See "Setting Enlarging/Reducing," on p. 5-2.)
•
Press [Collate/2on1] to perform the collate copy or 2 on 1 copy function.(See "Special Features," on p. 5-4.)
5
Press [Start].
The machine begins scanning.
NOTE
•
After printing of the current copy job is complete, the next copy job begins.
•
If the memory becomes full while scanning, <MEMORY FULL> appears in the LCD. When the ADF is used for
scanning, the document being scanned stops in the ADF. Press [Set] to make the document come out
automatically. If the document does not come out, it may be jammed in the ADF. Follow the procedure in
"Removing Jammed Paper from the ADF," on p. 9-6 to clear the paper jam in the ADF.
All of the scanned documents will be erased if <MEMORY FULL> appears, so divide the document and copy each
part separately, or select a lower image quality mode and make copies again.
5-8