To Change Password - Ideal Security SK633 Owner's Manual

1. TO CHANGE PASSWORD

a. Enter factory pre-set password 0-0-0. Press PROG
PASSWORD will flash on the auto-dialer screen. (Fig.5)
b. Press the ARM/DISARM
PASSWORD.
c. Enter your new password then press the ARM/DISARM
(you can choose from 3 to 6 digits for your password).
d. Press the PROG
NOTE: PASSWORD RESET
If you forget your password, open back of unit and locate the RESET button (Fig.5a).
Press and hold the PROG
screen will go blank. When screen returns let go of the PROG
the factory pre-set password of 0-0-0. This will reset the password ONLY, all other
information will remain (programmed telephone numbers and learned sensors)
2. SETTING THE TIME (YEAR / MONTH / DATE / HOUR / MINUTES)
a. Enter password followed by PROG
b. will flash on the auto-dialer screen.
c. Press ARM/DISARM
d. The date will show on the auto-dialer screen as five sets of numbers: year, month,
and date followed by the time hour and minutes (24hr time clock). The first set of
numbers will flash confirming that these can now be changed.
e. Enter correct year by pressing */UP
ARM/DISARM
month by pressing */UP
ARM/DISARM
have the correct date and time.
Page 5 of 17 5/11/2012
button to confirm that you want to enter the
button nine (9) times to exit set-up mode.
button, and, press and release the reset button once. The
button nine (9) times.
button to confirm.
or #/DOWN
button. The next set of number will start flashing, enter the
or #/DOWN
, and so on until all numbers have been entered. You will now
button once (1),
button to confirm
button. You now have
button, then press the
button, then press the button