Ideal Security SK633 Owner's Manual page 4

4. The supplied telephone line splitter can be installed into your telephone wall socket
(Fig.3a) or the LINE Jack of the auto-dialer (Fig.3b)
5. Using the telephone wire supplied, insert the small clear plug into the LINE jack on
the auto-dialer and the other end into the telephone line splitter, (Fig.3a) or insert
your telephone line splitter into LINE Jack of main unit, then insert telephone wire
supplied into wall socket. (Fig.3b)
6. Your existing telephone line can now be inserted into the telephone line splitter.
(Fig.3a/b)
7. Connect the AC adaptor to the DC 9V jack on the auto-dialer. (Fig. 3c)
8. Wall mount option: Choose a suitable location where you have access to a
telephone line and electricity, drill holes, using template provided and install
anchors and screws. Place the auto-dialer over the screws and slide it down to
secure it in place (fig 4).
SYSTEM AUTO-DIALER SET-UP
During any set-up, if no key is pressed for 10 seconds, the auto-dialer will automatically exit
set-up mode.

All set-ups are done in DISARM mode only.

Your auto-dialer has a factory preset password of 0-0-0. This can be changed to your
own personal password.
Page 4 of 17 5/11/2012