Ideal Security SK633 Owner's Manual page 17

1. AUTO-DIALER WILL NOT ARM/DISARM
a. Make sure you have entered the correct password, if not, re-enter the password.
b. If it still does not work, perform the
"CHANGE PASSWORD" section to reset the auto-dialer.
c. Retry the ARM/DISARM function.
2. UNIT WILL NOT DIAL
a. Make sure the telephone line is connected properly.
b. Make sure the telephone numbers are stored correctly.
c. Make sure the auto-dialer is setup for auto-dial mode.
d. If auto-dialer does not receive a signal from the wireless sensor, perform the learn
code function following the instruction in the
WIRELESS SENSORS"
3. FALSE TRIGGER
If the any sensor sends false signals, ensure that the batteries are still in good operating
condition. Make sure that the gaps between the contact and sensor on the window and door
contacts are no more than a ¼" apart and that arrows are pointing towards each other.
TIPS
1. Make sure the full telephone number has been entered correctly.
2. Only suitable for single phone line. Not compatible with fax machines or multi line
telephones.
WARNING
All batteries including the back up battery in the telephone dialer should be changed once
per year as the battery in smoke detector is changed. Should a power failure occur and the
back up battery is weak, or batteries in all your sensors are weak, false alarms may occur. If
the telephone dialer or any other detector is not being used for an extended period, remove
the batteries to avoid any damage from battery leakage.
NOTE: Please preserve this manual. It contains valuable information for properly setting
up and operating the system. Please check for updated instructions at
Thank you for your purchase: If you have any questions about setup or
function of this product, please call us at 800-361-2236 x230(514-363-1030)
before returning to the point of purchase. Perhaps we can resolve your
difficulty and eliminate future customer dissatisfaction.
e-mail: info@idealalert.ca
Page 17 of 17 5/11/2012
password reset
section.
www.idealalert.ca
following the instructions in the
"LEARN CODE FUNCTION FOR
www.idealalert.ca