Ideal Security SK633 Owner's Manual page 10

Page 10 of 17 5/11/2012
false signal to the auto-dialer. Batteries in all units should be replaced at least once per year
like your smoke detectors.
MODEL 625 (Wireless Slim Door/Window Sensor)
Install the four CR2032 batteries included into the two door and window contacts as shown
below. These two sensors are already learned to zone 2 and 3. When one of the sensors is
triggered either zone 2 or zone 3 will flash on the screen.
Determine appropriate location for the contact on the door or window to be protected.
Determine location for the wireless sensor/transmitter. How much space is available will
determine weather you install the transmitter on the door/window frame or on the door or
window. It will work either way.
Mount the TRANSMITTER portion of the contact to the door or window frame and the
magnetic contact portion to the door or window. Before using the double sided tape
provided, align the 2 sensor portions so that they are flush and with arrows facing each
other and no more then 1/4" apart. The contact portion can be installed on the left or right
side of the transmitter. Make sure to extend the antenna.