1. Manuals
  2. Brands
  3. Ideal Security Manuals
  4. Security System
  5. SK633
  6. Owner's manual

Ideal Security SK633 Owner's Manual

Wireless alarm system with motion sensor, door/window contacts, remote control and telephone dialer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Page 1 of 17 5/11/2012
SK633
Wireless Alarm system with motion sensor, door/window contacts, remote control and
telephone dialer.
OWNER'S MANUAL AND SET UP INSTRUCTIONS.
Thank you for choosing Ideal Security's Home Security System with Telephone Dialer.
If you have any questions, problems or comments regarding the installation or operation of
this system, please do not hesitate to contact IDEAL's customer service department
through our web site at www.idealalert.ca, via email at info@idealalert.ca, or by calling our
toll free number at 800-361-2236 x 230. Normal business hours 7:30am to 3:30pm Eastern
time. Monday to Friday.
Occasionally instructions have errors or omissions, please check for updates to these
instructions, security tips and other valuable information at
www.idealalert.ca
WIRELESS ALARM SYSTEM WITH AUTO DIALER.
This package includes:
1 (618) AUTO DIALER
1 (629) REMOTE CONTROL
2 (625) SLIM WINDOW / DOOR CONTACT
1 (6616) MOTION DETECTOR
Batteries and all connecting devices.
Before permanently installing any of the devices included in this package please test the
range of all units to make sure that the receiver picks up all the sensors.
MODEL 618 AUTO DIALER
THE TELEPHONE DIALER REQUIRES A LAND TELEPHONE LINE TO MAKE
OUTGOING CALL AND ELECTRICITY.
How it works
Our unique wireless security alarm with Auto dialer is designed to allow you to create your
own security system. It will alert you of an intrusion. You can decide how to respond, or
call the police. Choose a desired location for the auto-dialer with access to a land telephone
line and an electrical outlet. When the dialer is set to ARM mode, and a sensor is triggered,
the auto-dialer will activate the built-in siren (if set) and dial out (if set) to the up to 5 pre-
programmed telephone numbers one by one, for the pre-programmed cycles. You can set
the auto-dialer to a chime mode, you will hear one chime only when a sensor is activated.

Advertisement

Table of Contents
loading

Related Manuals for Ideal Security SK633

Summary of Contents for Ideal Security SK633

  • Page 1 OWNER'S MANUAL AND SET UP INSTRUCTIONS. Thank you for choosing Ideal Security’s Home Security System with Telephone Dialer. If you have any questions, problems or comments regarding the installation or operation of this system, please do not hesitate to contact IDEAL’s customer service department through our web site at www.idealalert.ca, via email at info@idealalert.ca, or by calling our...

  • Page 2: Important Safety Tips

    Page 2 of 17 5/11/2012 Important note regarding Auto Dialer: ANSWERING MACHINES and REMOTE COMMUNICATION. If you intend to use the features (controlling the alarm unit REMOTE ACTIVATION remotely), you cannot use an answering machine. To use the remote activation feature: Set the auto dialer to respond (pick up) before your answering machine responds.
  • Page 3  HOME mode function (auto dialer will chime when sensors are triggered)  Built-in 105 dB alarm (with programmable alarm on/off)  External extend trigger input terminal (to connect Ideal’s wired window and door contacts SK619)  AC adaptor and 9V battery back-up (included) ...
  • Page 4 Page 4 of 17 5/11/2012 4. The supplied telephone line splitter can be installed into your telephone wall socket (Fig.3a) or the LINE Jack of the auto-dialer (Fig.3b) 5. Using the telephone wire supplied, insert the small clear plug into the LINE jack on the auto-dialer and the other end into the telephone line splitter, (Fig.3a) or insert your telephone line splitter into LINE Jack of main unit, then insert telephone wire supplied into wall socket.

  • Page 5: To Change Password

    Page 5 of 17 5/11/2012 1. TO CHANGE PASSWORD a. Enter factory pre-set password 0-0-0. Press PROG button once (1), PASSWORD will flash on the auto-dialer screen. (Fig.5) b. Press the ARM/DISARM button to confirm that you want to enter the PASSWORD.

  • Page 6: Pause Function

    Page 6 of 17 5/11/2012 f. Press PROG button once (1) to exit set-up mode. 3. TO PROGRAM EMERGENCY TELEPHONE CALL NUMBERS a. Enter password followed by PROG button twice (2). b. MEMORY will flash on the auto-dialer screen. (Fig.6) c.
  • Page 7 Page 7 of 17 5/11/2012 e. Enter 5143631030 DEL./PAUSE (hold for 2 seconds until the letter F appears on the screen, then enter 230. f. Press ARM/DISARM button to confirm. g. Press PROG button eight (8) times to exit set-up mode. 6.
  • Page 8 Page 8 of 17 5/11/2012 The auto-dialer has been factory pre-set for auto dialing for 1 cycle (When a sensor is triggered the auto dialer will call all stored numbers 1 time. You can change this cycle from 1 to 5 dialing cycles. a.

  • Page 9: Installation

    Page 9 of 17 5/11/2012 MODEL 6616 Wireless Outdoor Adjustable Angle Motion Detector Sensor INSTALLATION Install 3 AAA batteries included into the bottom of the motion detector as shown below. This sensor is already learned to zone 1. If you wish to change the zone location of this sensor follow the directions at the end of these instructions.
  • Page 10 Page 10 of 17 5/11/2012 false signal to the auto-dialer. Batteries in all units should be replaced at least once per year like your smoke detectors. MODEL 625 (Wireless Slim Door/Window Sensor) Install the four CR2032 batteries included into the two door and window contacts as shown below.
  • Page 11 Page 11 of 17 5/11/2012 BATTERY LOW INDICATOR When batteries are low, the LED will flash on 3 seconds and off 1 second. Replace the batteries immediately, to maintain proper detection. If batteries are low they may send a false signal to the auto-dialer. Batteries in all units should be replaced at least once per year like your smoke detectors.

  • Page 12: To Disarm The System

    Page 12 of 17 5/11/2012 a. If the auto-dialer (in ARM mode) receives a signal from any sensor, the screen will display TRIGGER with the zone number. After the delay entry time it will sound a SIREN for 30 seconds on, 30 seconds off and 30 seconds on, and will automatically dial all the numbers stored, one by one, for the CYCLE (amount of times the numbers are dialed) you have chosen.
  • Page 13 Page 13 of 17 5/11/2012 6. REMOTE CONTROL BY TELEPHONE TO CONTROL ALARM (To control your auto dialer via telephone) a. Telephone your home number. The auto-dialer will answer after the designated amount of rings that you have programmed. b. Once answered enter your PASSWORD, you will hear two beeps (confirmation). c.
  • Page 14 Page 14 of 17 5/11/2012 NOTE: Arming system while in Home mode will deactivate Home mode. When you disarm the system you will have to press the Home button again if you want to return to Home mode. In Home mode the only thing the system does not do is dial out or sound alarm for zones 1-7 and 8S.
  • Page 15 Page 15 of 17 5/11/2012 The units included in this package have already been learned to the auto dialer. You may learn additional sensors to your auto-dialer and at some time you may have to re-learn existing parts.. The system has a total of 10 zones for wireless sensors and remote controls. Zone 1-7: Learn up to 7 wireless sensors, and they will trigger the dialer in armed mode only.

  • Page 16: Troubleshooting Guide

    ADDING IDEAL’S WIRELESS SIREN OR AC OUTLET TO THE SYSTEM LEARN AUTO DIALER TO SEND SIGNAL TO WIRELESS SIREN (SK629) OR AC OUTLET CONTROL (SK635) WHEN TRIGGERED.
  • Page 17 Page 17 of 17 5/11/2012 1. AUTO-DIALER WILL NOT ARM/DISARM a. Make sure you have entered the correct password, if not, re-enter the password. b. If it still does not work, perform the following the instructions in the password reset “CHANGE PASSWORD”...

Table of Contents