Ideal Security BK6311 Instructions

WIRELESS BED ALARM
Thank you for purchasing an Ideal Security product.
The 6311 Wireless Bed Alarm includes a weight sensing pad, a wireless transmitter, and a wireless
receiver alert.
We take customer service seriously and pride ourselves on our relationships with our customers.
If you encounter any difficulties during the set-up or have any questions, please see the customer
service section of this document.
FEATURES
WIRELESS RECEIVER ALERT FEATURES
• Six different alarm tones, for distinguishing which pad was triggered
if multiple pads are set up
• Silent (lights only) alarm mode available
• Power: 3 x C Alkaline batteries required (not included)
• Optional AC adapter (not included) available for purchase
• Battery life in standby mode: 8 months approx.
• Battery-low LED indicators
• Sound level (at 1 ft / 30 cm): 95 dB
• Signal transmission range: 131 ft (40 meter), line of sight
• Wireless signal frequency: 433.92 MHz
• Mountable using the keyhole slots on the rear
• Size: 5" x 3-3/4" x 1-1/2" (128 x 95 x 38 mm)
• Indoor use only
• Wireless receiver alert can link up to six weight sensing pad/wireless transmitters
ALARM FEATURES
By default, the transmitter and receiver are factory-linked to the #5 sound (see table in the
next section).
Up to 6 transmitters can be linked to a single receiver. Each transmitter will be connected to one
of the six sounds on the receiver, having its own unique sound. Each sound can be linked to one
transmitter only. Once a transmitter is linked to a sound, the sound is then removed from the
available sounds.
The receiver also has a silent mode available, which flashes light with no sound. This alert will
last as long as the selected sound on the receiver. (i.e. if the receiver has sound #4 selected, the
light will flash for 30 seconds).
A single transmitter can also be linked to multiple receivers, triggering alerts on all receivers at
the same time.
Please note that multiple receivers should be placed at least 3 ft (1 m) apart from each other.
www.idealinc.com
Listed below are the six different sounds in order:
Sound Duration
1. Ding-dong ............................ 2 cycles
2. Di-di .................................... 10 seconds
3. Di-di-di ................................ 30 seconds
4. Di-du ................................... 30 seconds
5. DididiDududu ....................... Forever, batteries will last up to 36 hours
6. Wawa siren .......................... Forever, batteries will last up to 36 hours
Silent mode - lights only � Same as selected sound (See OPERATION section)�
WIRELESS TRANSMITTER FEATURES
• Power: 2 x AAA Alkaline batteries required (not included)
• Replaceable batteries: Unlike other mats, the batteries in your 6311 transmitter are
easily replaceable
• Battery life in standby mode: 1 year approx.
• Battery low indicator
• Transmission distance: Up to 40 m (130 ft), line of sight.
• Wall mountable with the included double-sided tape or using screws (not included)
• Long lead wire with connector: 10 ft for easy placement
• Size: 2-7/8" x 1-1/4" x 1" (72 x 31 x 25 mm)
• Indoor use only
WEIGHT SENSING PAD FEATURES
• Size: 30" x 14" x 3/16" thick (762 x 355 x 4.75 mm)
• Sensitivity: 1 psi
• IP44 water resistant pad
• Indoor use only
• Easy to replace (replacements available for order)
• Long lead wire with connector: 6 ft
• FCC approved device
DESCRIPTION OF COMPONENTS
RECEIVER
7
SOUND
1 POWER 6
ON
ON
OFF OFF
(1) Sound on/off switch
(2) Transmitter battery low/trigger
indication LED
(3) In-use indication LED
(4) Receiver battery low/trigger
BK6311
indication LED
We recommend placing the weight sensing pad under the shoulders or hips, where the most
consistent contact is made with the bed. Generally, the shoulders provide the most consistent
performance, but you may find the pad more comfortable if placed under the hips. If you toss
and turn frequently at night, you may experience more false alarms. Try different positions to
optimize for comfort and reliability.
For safety, we recommend hiding away the wires under the bed structure and/or taping the
wires onto a wall or floor. A loose wire may present a fall hazard.
RECEIVER
4
5
8
LEARN
9
WIRELESS TRANSMITTER
(5) Buzzer
(6) Power on/off switch
(7) DC jack
(8) Learn ID code button
Note: There is no ON/OFF switch� If you want to
(9) Battery cover turn the alarm off you can do so on the receiver�
Mini
transmitter
Pressure mat
POSITIONING
SET-UP AND INSTALLATION
(Fig.1)
1. Remove screw from back of the receiver cover and open the panel. (Fig.1)
2. Install three "C" batteries in the receiver. (Fig.2)
3. You can connect an AC adapter (6V DC 500mA (not included); plug length: 12mm; inside
positive ID: 2.1mm; outside negative OD: 5.5mm) to the alert, and install the batteries as
backup in case of power failure.
1. Remove the screw from the bottom of the transmitter
2. Install two AAA batteries (not included)
(Fig.2)
(Fig.3)