Advertisement

TESTING MADE EASY

Testing your blood sugar

1
Once you have loaded the 10-test disc
(see reverse side), hold the meter in your
hand or on a flat surface. Pull out
then push back in
expose a test strip. The meter will automati-
cally turn on, and the "apply blood" prompt
will appear on the screen. The meter is now
ready to test.
2
Touch the tip of the test strip to the blood
drop. Hold in place
beeps and countdown begins from 5 to 1.
The result is displayed
and is stored in the meter automatically for
future reference.
3
To discard the test strip, hold the meter
pointing down over a waste container and
press the blue release button at the top.
Then turn the meter off.
For more information on Bayer
products and services, visit
www.BayerDiabetes.com/us
(1a)
(1b)
the meter handle to
(2a)
until the meter
(2b)
after 5 seconds
QUICK TEST GUIDE
and
1a
2a
3
1b
2b

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Breeze2 and is the answer not in the manual?

Questions and answers

Summary of Contents for Bayer HealthCare Breeze2

  • Page 1: Testing Your Blood Sugar

    QUICK TEST GUIDE TESTING MADE EASY Testing your blood sugar Once you have loaded the 10-test disc (see reverse side), hold the meter in your hand or on a flat surface. Pull out (1a) then push back in (1b) the meter handle to expose a test strip.
  • Page 2 QUICK TEST GUIDE TESTING MADE EASY Loading the BREEZE ® 2 Test Disc To open the meter, hold it with the screen facing down. Press in on the gray latch on the top edge of the meter, and then pull up. Insert a new 10-test disc, bumpy side up, keeping the meter flat.

Table of Contents