Bayer HealthCare BLOOD GLUCOSE MONITORING SYSTEM User Manual page 11

Replace the endcap prior to
getting your blood drop.
Remove a test strip from the
bottle. Tightly close the
bottle lid immediately
after you have removed
the test strip.
NOTE: Check the expiration and discard dates on the bottle.
Make sure the test strip does not appear torn or damaged.
Hold the test strip with the
gray end facing up.
Insert the gray end into the
test strip port on the meter.
The meter will turn on. An
image of a test strip with
a flashing blood drop will
appear letting you know the
meter is ready to test.
9
www.bayerdiabetes.ca