Bayer HealthCare BLOOD GLUCOSE MONITORING SYSTEM User Manual page 23

Using the Alarm:
When the alarm sounds, the
meter will automatically turn
on. The alarm will beep 20
times, and the display will
show the pre-meal test result
you marked when you set the
alarm. Pressing any button will
silence the alarm.
You can now run another test by placing a test strip in the test
strip port and following the testing instructions (page 8).
When you have completed
this test and the result is
shown on the display, will
flash. To mark this test as a
post-meal result, press M. If
you do not want to mark this
test, remove the test strip to
turn the meter off.
If you decide not to test after the alarm sounds, press any
button to turn your meter off.
The meter will only set one alarm at a time. It will remember
the last alarm set.
21
www.bayerdiabetes.ca