Standards And Approvals - Mira Extreme Thermostatic Installation And User Manual

1.10 Noise – The Mira Extreme is supplied with anti-vibration rubber feet and rubber
wall plugs that isolate the unit from the wall in order to minimize the amount of
noise transmitted. The type of wall the Mira Extreme is fixed to will also affect
the perceived noise level; solid walls will provide a quieter operation.
2. Plumbing
2.1 Inlet – 15 mm Push-fit inlet manifold.
2.2 Outlet – ½" BSP to BS2779.
3. Electrical
3.1 Appliance power supply – 230–240 V, 50 Hz, fused at 3 Amps, via a double
pole switched fused connection unit (not supplied) with a minimum 3mm contact
separation in each pole.
3.2 Power supply connection – The Mira Extreme is fitted with a terminal block
which will accept cable up to 2.5 mm². Minimum cable size (cross-sectional
area) required under normal installation conditions is 1 mm
3.3 Absorbed power – Approximately 150 Watts under normal working
conditions.

4. Standards and Approvals

4.1 The Mira Extreme complies with all relevant directives for CE marking.
11
.
2