Temperature Override Button - Disable - Mira Extreme Thermostatic Installation And User Manual

3. Temperature Override Button – Disable
The Mira Extreme incorporates a temperature override button that allows the user
to override the preset maximum temperature. This override button can be disabled,
limiting the maximum selectable showering temperature to the preset value. This
setting is recommended for the young, the elderly, the infirm, or anyone inexperienced
in the correct operation of the controls.
To disable the temperature override button:
3.1 Turn the temperature control knob
clockwise to full cold.
3.2 Remove the temperature knob using
the push-fit release tool.
3.3 Locate the plastic temperature
override lock.
3.4 Raise the override lock until it clicks
into the hold position, allowing the
over-ride button on the temperature
control knob to bypass the stop. The
temperature override button is now
enabled.
3.5 To disable the temperature override
again, lower the override lock until it
clicks into position.
3.6 Replace the temperature knob.
Turn the
temperature
control knob
to full cold.
Override Lock raised
Temperature Override
Override Lock lowered
Temperature Override
26
Temperature
Override
Button
Button Enabled
Button Disabled