Plumbing
1.
Minimum maintained inlet pressure for satisfactory operation:
8.5kW and 9.5kW: 70kPa (0.7 bar).
10.8kW: 100kPa (1.0 bar).
2.
Maximum static inlet pressure: 1000kPa (10 bar).
3.
Minimum static pressure to keep the flow valve closed: 50kPa (0.5 bar).
Electrical
1.
The 8.5kW and 9.5kW appliance requires a 40Amp fuse.
The 10.8kW requires a 45 Amp fuse.
2.
The terminal blocks will accept cable up to 16mm
Standards and Approvals
1.
This Mira Jump shower complies with all of the relevant directives for
CE marking.
Flow Rate Graph
1.
These curves are for the specified outputs at 240V.
2.
All appliance heating elements have a manufacturing tolerance. Flow rates may
be above or below those shown on the flow rate graph.
3.
The left-hand axis shows temperature rise.
Temperature rise = (Showering temperature) - (Supply water temperature)
10.8kW
9.5kW
8.5kW
Flow Rate (l/min)
10
.
2