Table of Contents
Advertisement
•
Once a key on the panel is pressed, it will return to the display as it was before the Idle
status.
•
Initial setting=10 min, setting range: 0~60 min.
U Group (Monitor):
U1 Group (Monitor)
U1-01: AC IN Voltage
•
Use U1-01 to monitor the voltage value of AC IN power in steps of 0.1V.
U1-02: AC IN Current
•
Use U1-02 to monitor the current value of AC IN power in steps of 0.1A.
U1-03: AC OUT Voltage
•
Use constant U1-03 to monitor AC OUT voltage value in steps of 0.1V.
U1-04: AC OUT Current
•
Use constant U1-04 to monitor AC OUT current value in steps of 0.1A .
U1-05: Battery Voltage
•
Use constant U1-05 to monitor the battery voltage in steps of 0.1V.
U1-06: Battery Ripple Voltage
•
Use constant U1-06 to monitor the battery ripple voltage in steps of 0.1V.
U1-07: Battery Current
•
Use constant U1-07 to monitor battery current value in steps of 0.1A.
U1-08: Control Mode
•
Use constant U1-08 to monitor the current control mode (MODE 1, MODE 2, MODE 3
or MODE 4)
U1-09: Operation Status
•
There are 12 digits to account for each operation status. Please see NOTE 1 in Chapter 5.
U1-10: Aux-Relay Status
•
Use constant U1-10 to monitor the ON/OFF status of 3 sets of Aux-Relay (RY1, RY2,
RY3). Please see NOTE 2 in Chapter 5.
70
090138.02
Battery charger / inverter COMBI-GAMMA
Advertisement
Table of Contents
