Chapter 6 Programming Constants; A Group: Initialize - Vetus Combi-Gamma COMBI1512 Operation And Installation Instructions Manual

Chapter 6 Programming Constants

A Group (Initialize):
A1 Group (Initialize)
A1-01: Access level
• Use constant A1-01 to select the user constant access level.
This level determines which user constants can be changed and displayed.
Setting
A1-01=0
A1-01=1
(Initial setting)
A1-02: Select Language
• Use constant A1-02 to select the language displayed by the Combi-Gamma. A value of
0 set English and values of others set other language.
• This user constant is not returned to factory setting when constants are initialized. It
must be manually reset to factory setting.
Setting
A1-02=0
(Initial setting)
A1-02=1
A1-02=2
A1-02=3
A1-02=4
A1-02=5
A1-02=6
A1-03: Init Parameters
• Use constant A1-03 to initialize the user constants.
• When initialized, the user constants will return to their factory preset values. You should
normally record the setting of any constants that are changed from factory presets.
Setting
A1-03=0
(Initial setting)
A1-03=1
Battery charger / inverter COMBI-GAMMA
This setting allows the "operation" and "initialize" to be changed or displayed.
Use this setting to prevent user constant settings from being changed.
This setting allows all user constants to be changed or displayed.
English language
Reserved, under development
Reserved, under development
Reserved, under development
Reserved, under development
Reserved, under development
Reserved, under development
Returns to initialize Display without initializing any user constants.
Initializes the user constants to factory settings.
Function
Function
Function
53
090138.02