Power Connector Cable - HP Spectrext Maintenance And Service Manual

2. Unclip the TouchPad LED board (2), and then remove it (3).

Power connector cable

Description
Power connector cable (includes bracket)
Before removing the power connector cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the display panel (see
5. Remove the base enclosure (see
6. Disconnect the battery cable (see
Remove the power connector cable:
1. Turn the computer, with the right side toward you.
50 Chapter 4 Removal and replacement procedures
Display panel on page
Base enclosure on page
Battery on page 31).
Spare part number
689937-001
54).
29).