Display Panel - HP Spectrext Maintenance And Service Manual

Display panel

Description
13.3-in, LED, BrightView SVA display panel
Before removing the display panel, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
Remove the display panel:
1. Turn the computer right-side up, with the rear toward you.
2. Open the computer.
3. Remove the base enclosure (see
4. Remove the 2 Phillips PM 5.0 millimeter screws on the left and right hinges (1).
5. Remove the Phillips PM 3.0 millimeter screw on the left hinge (2).
6. Rotate both hinges to the open position (3).
NOTE:
54 Chapter 4 Removal and replacement procedures
Support the display panel as you are removing the screws.
Base enclosure on page
Spare part number
692891-001
29).