Table of Contents
Advertisement
To measure CH1 voltage:
1. Press MENU, the function menu will appear on the right side of the
screen.
2. Press MENU ▲ or MENU ▼ and choose AUTOSCALE; three (3) options
will appear at the bottom of the screen
3. Press F1 to select ON
4. Press AUTOSET to enter the Autoscale mode; the symbol
every half second at the top left of the display
5. Press F2 to select the Horizontal/Vertical mode
6. Press F3
Horizontal
HORI—VERT
and refer to the display examples below:
changing horizontal setting
Adjust horizontal scale
without changing vertical
setting
Adjust the vertical and
horizontal settings
Display one or two periods
Display multi-period
waveforms
56
flickers
V5.1 ‐ March 2010
Advertisement
Table of Contents
