Table of Contents
Advertisement
options will then appear at the bottom of the screen
3.
Press the F1 key to select the frequency measurement of CH1. The measurement
window will appear red in color and show the frequency of CH1
4.
Press the MENU ▲ or MENU ▼ key to select MEAS SET 2. Five (5) selectable
options will then appear at the bottom of the screen
5.
Press the F4 key to select the peak-to-peak value of CH2. The measurement
window will appear blue in color and show the peak-to-peak value of CH2
Autoscale
Autoscale enables the instrument to automatically configure the trigger
mode, voltage division and time scale according to the type, amplitude and
frequency of a signal.
The menu is as follows:
Function Menu
Autoscale
Mode
Figure 31: Automatic Measurements
Setting
OFF
ON
Vertical
55
Instruction
Turn OFF
Autoscale
Turn ON
Autoscale
Adjust vertical scale without
V5.1 ‐ March 2010
Advertisement
Table of Contents
