Table of Contents
Advertisement
Vertical
Analog digital converter A/D
Sensitivity range V/div
Displacement range
Analog bandwidth
Single bandwidth
Low frequency response
(A/D coupling, -3dB)
Rise time
DC gain accuracy
DC measurement (accuracy
average value sampling
mode
Trigger
Trigger sensitivity
Edge trigger
Triggering level range
Triggering level accuracy
(typical) which is applicable
to the signal with rise and
fall time equal to or longer
than 20ns
Trigger displacement
50% level setting (Typical).
8 bits resolution (both channels synchronously)
5mV/div 5V/div(for the BNC connector input
± 10 div (MS420),
±50V(500mV/div ~5 V /div) (MS460)
60MHz (MS460); 20MHz (MS420)
Full bandwidth
≥ 5Hz (BNC connector
≤17.5ns (MS420) , ≤5.8ns (MS460)
±5%
The voltage difference between any two points on
the waveform after averaging the captured
waveforms is greater than 16: ± (5% reading + 0.05
divisions)
DC
CH1 and CH2: 1div (DC full bandwidth)
coupling
AC
Same as the DC coupling when it is equal
coupling
to or larger than 50Hz.
±6 divisions from the screen center
±0.3 divisions
655 divisions for pre-triggering and 4 divisions for post-
triggering
Operation with the input signal frequency equal to or
larger than 50Hz.
99
±2V(5mV/div ~ 200mV/div),
V4.0 ‐ March 2010
Advertisement
Table of Contents
