Intelix VC Series Mic/Line Mixer User Manual
7.2 Mixer Expansion through Linking
Intelix VC mixers can be simply linked to provide a wider mixer bus. For example linking two
VC 8 channel mixers results in a 16 channel mixer. Although an indefinite number of mixers
can be linked in this way, Intelix recommends that you link no more than three mixers because
of the accumulation of noise.
To Link two mixers you must make a cable with a DB-25 on each end. The cable is wired so
that mixer 1's pin 12 is connected to mixer 2's pin 1 and mixer 1's pin 24 is connected to
mixer 2's pin 2.
Linking three mixers requires three DB-25 connectors wired as shown in the drawing below.
Note that the bottom unit (Mixer 3) has the sum of all three mixers.
20
intelix