Installation And Operation; Unpack And Connect - Intelix 4001 VC User Manual

Intelix VC Series Mic/Line Mixer User Manual

3.0 Installation and Operation

Following these steps will ensure the installation and operation of your VC Series mic/line
mixer will be quick and effective.

3.1 Unpack and Connect

First, remove the mixer from its box, inspecting the unit for shipping damage. If there is
obvious physical damage, contact Intelix immediately before proceeding with the installation.
Next, set all volume control knobs on the mixer to zero. Also, set all amplifier volume con-
trols to zero.
You are now ready to connect the physical inputs into the VC Series mixer (up to four inputs
on 4001 models and eight inputs on 8001 models). Insert the XLR input connectors into the
desired XLR input connector on the rear panel.
Set the XLR input pad microphone/line switch to the appropriate position: "in" for line input
and "out" for mic input. Note that the input from some microphones is actually closer to line
level (-20 dB); for such microphones, the switch should be set to the line position.
Note: Set the XLR input pad microphone/line switch for all unused channels to line level.
10
intelix